Solutions To Panel Alignment Problems; Solutions When Using Hdmi Link; Solving Network Problems - Epson Home Cinema 5050UBe User Manual

Solutions to Panel Alignment Problems

If the panel alignment does not result in a satisfactory picture, try the following solutions:
• Make sure the Projection setting matches the installation position.
• Make sure the projection surface is not colored or textured. Project on a white surface with no texture.
• Leave the projector on for 10 to 15 minutes before adjusting the panel alignment.
• The projected image size should be at least 60 inches (152 cm) during panel alignment.
• If the image contains too much magenta, adjust the red and blue panels.
• If the pattern lines look fuzzy or out of focus, adjust the focus before performing the panel alignment.
Parent topic:
Related references
Projection Distance
Related tasks
Focusing the Image with the Lens Button
Adjusting the Color Convergence (Panel Alignment)

Solutions When Using HDMI Link

If you cannot control an HDMI device using the HDMI Link buttons, try the following solutions:
• Make sure all necessary cables are securely connected and the power is on for the projector and
connected video sources.
• Make sure the cables meet the HDMI CEC standard.
• Make sure the connected device meets the HDMI CEC standard. See the documentation supplied
with the device for more information.
• If you connected a new device or changed any connections, make sure the CEC function is set for the
connected device. You may need to restart the device.
• Connect no more than three devices that support HDMI Link at the same time.
• If you have connected a speaker or receiver, set the output to PCM.
Parent topic:

Solving Network Problems

Check the solutions in these sections if you have problems using the projector on a network.
Solving Projector or Remote Control Operation Problems
Solving Projector or Remote Control Operation Problems
161