Mute Your Call; Put A Call On Hold; Answer A Call Left On Hold For Too Long; Swap Between Active And Held Calls - Cisco 7832 User Manual

Note: The message the caller will hear is "The number you have dialed is not accepting calls at this time.
Please try again later."

Mute Your Call

While you are on a call, you can mute the audio, so that you can hear the other person, but they cannot hear you.
When you have a call muted, the LED bar lights red.
Procedure
Step 1 Press Mute
Step 2 Press Mute again to turn mute off.
Hold Calls

Put a Call on Hold

You can put an active call on hold and then resume the call when you're ready.
Procedure
Step 1 Press Hold.
Step 2 To resume a call from hold, press Resume.

Answer a Call Left on Hold for Too Long

When you've left a call on hold too long, you'll be notified with these cues:
• Single ring, repeating at intervals
• Flashing LED bar
• Visual notification on the phone screen
Procedure
Press Answer to resume the held call.

Swap Between Active and Held Calls

You can easily switch between active and held calls.
Procedure
Press Swap to switch to the held call.
12 | P a g e
.
Cisco IP Phone 7832 Series User Guide