Pair A Wireless Microphone; Unpair A Wireless Microphone - Cisco 8832 User Manual

Your Phone
Procedure
Step 1
Position the table mount plate on the table surface location where you want to place the microphone.
Step 2 Remove the adhesive for the double-stick tape on the bottom of the table mount plate. Place the table mount
plate to adhere to the table surface.
Step 3 Attach the microphone to the table mount plate. Magnets are embedded in the microphone to snap the unit
into place.
You can move the microphone and attached table mount to a different location on the table surface as needed.
Use care when moving to protect the unit.
Related Topics

Pair a Wireless Microphone

Before you begin
Unplug any wired microphones.
Procedure
Step 1
Press Settings.
Step 2 Select Admin Settings > Microphones > Wireless microphones.
Step 3
Select either Microphone 1 or Microphone 2 and press Pair.
If a microphone is already linked to a particular channel, the phone screen shows that the microphone is paired.
Step 4 Press Mute
If the pairing succeeds, the phone screen displays a success message.
Step 5 (Optional) Press Cancel to revert to the Wireless microphones menu.
Related Topics

Unpair a Wireless Microphone

Procedure
Step 1 Press Settings.
Step 2
Select Admin Settings > Microphones > Wireless microphones.
Wireless Expansion Microphone, on page 19
Install the Wireless Expansion
on the wireless microphone until the microphone LED blinks white.
Wireless Expansion Microphone, on page 19
Microphones, on page 8
Cisco IP Conference Phone 8832 User Guide
Pair a Wireless Microphone
9