Connection Instructions - Nexgrill 820-0007GE Owner's Manual

Portable stainless steel gas grill

Table of Contents

Available languages

GAS HOOK-UP

Only the pressure regulator and hose assembly supplied with the grill should be used. Any replacement pressure regulator

and hose assembly must be specified by the grill manufacturer. This grill is configured for liquid propane. Do not use a

natural gas supply.

Total gas consumption (per hour) with all burners set on "HIGH":

EACH BURNER

TOTAL

The installation of this appliance must conform with local codes or, in the absence of local codes, with either the National

Fuel Gas Code, ANSI Z223.1/NFPA 54, National Gas Propane Installation Code, CSA B149.1, or Propane Storage and Handling

Code, B149.2,or the Standard for Recreation Vehicles, ANSI A119.2/NFPA 1192, and CSA Z240 RV Series, Recreation Vehicle

Code, as applicable.

A dented or rusty liquid propane cylinder may be hazardous and should be checked by your

supplier. Never use a cylinder with a damaged valve. The liquid propane cylinder must be

constructed and marked in accordance with the specifications for liquid propane cylinders by

the United States Department of Transportation (DOT) or the National Standard of Canada, CAN/

CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods Commission.

The 9 kg (20 lb) cylinder must have a shut-off valve terminating in a valve outlet specified, as

applicable, for connection type QCC1 in the standard for compressed gas cylinder valve outlet and

inlet connection ANSI/CGA-V-1.

Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is

disconnected and removed from the outdoor cooking gas appliance. The cylinder system must be

arranged for vapour withdrawal. The cylinder must include a collar to protect the cylinder valve.

Manifold pressure: (operating) 27.9 cm (11 in) water column, (non-operating) 28.4 cm (11.2 in) water

column.

The liquid propane cylinder must be fitted with an overfill protection device (OPD).

If fitted, remove the plastic valve cover from the liquid propane cylinder. Make sure the grill's

gas hose does not contact the grease pan or grill firebox when the liquid propane cylinder is

positioned.

WARNING:

NEVER ATTEMPT TO USE DAMAGED OR OBSTRUCTED EQUIPMENT. SEE YOUR LOCAL LIQUID PROPANE

DEALER FOR REPAIR.

REPLACING THE LIQUID PROPANE CYLINDER

Turn the grill burner knobs clockwise to "OFF" () and make sure the grill is cool.

Turn the liquid propane cylinder valve to the CLOSED position by turning clockwise

until it stops.

Detach the regulator assembly from the cylinder valve by turning the

quick-coupling nut counterclockwise.

Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only

install the type of dust cap on the cylinder valve outlet that is provided with the

cylinder valve. Other types of caps or plugs may result in leakage of propane.

10,000 BTU/HR.

20,000 BTU/HR.