Operation - Gardena ErgoCut 58 Operating Instructions Manual

3. Operation

2
1
Connecting the Hedge
Trimmer :
5
3
4
Working positions :
Rotate cutting unit
through 90° :
7
DANGER ! Risk of physical injury !
V Always disconnect the extension cable
A
the mains and slide the protective cover
the trimmer blade
V Never take hold of the protective cover
connecting the hedge trimmer.
DANGER ! Risk of electric shock !
To avoid damage to the the mains cord
A
extension cable
lock
V Always insert the extension cable
cable lock
1. Loop the extension cable
5
lock and pull tight.
2. Insert the plug of the mains cord
extension cable
3. Plug the extension cable
The hedge trimmer can be operated in 3 working positions.
Side trimming:
Cutting unit in
90° position
For sideways cutting, the cutting unit can be rotated through 90°.
The cutting unit
handed or left-handed users respectively.
1. Disconnect mains plug.
2. Keep button
3. Turn cutting unit
6
button locks into place.
6
A safety device prevents the Hedge Trimmer from starting up when
6
the button is pressed or not locked in 0° or 90° position.
2
before connecting.
4
must be inserted into the cable
5
.
5
.
4 ,
insert the loop into the cable
3
4
.
4
into a 230 V mains power supply.
High trimming :
0° position
7
can be turned to the right or left for right-
6
pressed.
7
90° in the required direction until the
4
from
1
over
1
when
3
the
4
into the
into the socket of the
Low trimming :
0° position
13