Konica Minolta bizhub 3622 User Manual page 62

Understanding the printer menus
Menu item
PCL5 Minimum Line Width
1–30 (2*)
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
198 mm*
203 mm
Auto CR after LF
On
Off*
Auto LF after CR
On
Off*
Tray Renumber
Assign MP Feeder
Off*
None
0–201
Assign Tray [x]
Off*
None
0–201
Assign Manual Paper
Off*
None
0–201
Assign Manual Envelope
Off*
None
0–201
Tray Renumber
View Factory Defaults
Tray Renumber
Restore Defaults
Print Timeout
Disabled
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the initial minimum stroke width.
Notes:
•
Jobs printed in 1200 dpi use the value directly.
•
Jobs printed in 4800CQ use half the value.
Set the width of the logical page on A4‑size paper.
Note: Logical page is the space on the physical page where data is
printed.
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Configure the printer to work with print drivers or applications that use
different source assignments for the paper source.
Show the factory default setting assigned for each paper source.
Return all tray assignments to factory default values.
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
62