HIKVISION DS-2DE1A400IW-DE3 User Manual page 78

User Manual of Network PTZ Camera
Steps:
1. Enter the SNMP settings interface:
Configuration > Network > Advanced Settings > SNMP
2. Check the corresponding version checkbox (Enable SNMP v1, Enable SNMP v2c, Enable
SNMP v3) to enable the feature.
3. Configure the SNMP settings.
The configuration of the SNMP software should be the same as the settings you configure
here.
4. Click
Configuring FTP Settings
Purpose:
You can set a FTP server and configure the following parameters for uploading captured pictures.
© Hikvision
Figure 6-7 SNMP Settings
to save and finish the settings.
70