Configuring Display Settings - HIKVISION DS-2DE1A400IW-DE3 User Manual

User Manual of Network PTZ Camera

On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on different camera models.

6.3.1 Configuring Display Settings

Purpose:
Configure the image adjustment, exposure settings, day/night switch, backlight settings, white
balance, image enhancement, video adjustment, and other parameters in display settings.

The parameters in Display Settings interface vary depending on different camera models.

You can double click the live view to enter full screen mode and double click it again to exit.
Steps:
1. Enter the Display settings interface:
Configuration > Image> Display Settings
2. You can select the Scene in the dropdown list with different predefined image parameters.
3. Set the image parameters of the speed dome.
Image Adjustment

Brightness
This feature is used to adjust brightness of the image. The value ranges from 0 to 100.

Contrast
This feature enhances the difference in color and light between parts of an image. The value
ranges from 0 to 100.

Saturation
This feature is used to adjust color saturation of the image. The value ranges from 0 to 100.

Sharpness
© Hikvision
to show the PTZ control panel or click
Figure 6-24 Display Settings
84
to hide it.