Rtp/Rtcp - Panasonic Pure IP-PBX KX-TDE100 Programming Manual

Maximum Bit Rate
Specifies the maximum bit rate of the fax signal.
Value Range
No Speed Limit, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. This feature enables end-to-end fax signal relay when
the other party prefers a codec other than G.711. This feature functions only if the other party supports G.711.
Value Range
Disable, Enable
DTMF
Specifies the method to transport DTMF tones.
Value Range
Inband, Outband (RFC2833), Outband (SIP INFO)
Payload Type
Specifies the payload type of RFC2833 for DTMF tones.
Note
Manual programming is required if DTMF is set to Outband (RFC2833).
Value Range
96–127

3.1.9 RTP/RTCP

Shelf (KX-TDE600 only)
Indicates the shelf position (reference only).
Value Range
Shelf type
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Port
Indicates the port number (reference only).
Programming Manual for Virtual SIP Trunk Card
3.1.9 RTP/RTCP
31