Main - Panasonic Pure IP-PBX KX-TDE100 Programming Manual

2.
Enter information or select from the list for each parameter.
Adding Settings to Provider Profiles
Follow the steps below to add the settings to provider profiles.
1.
Click Add Provider.
A dialogue box will appear. Available virtual SIP gateway port numbers are displayed in the list.
2.
Highlight the desired port numbers or click Select All to select all the virtual SIP gateway port numbers to
add the settings to provider profiles.
3.
Click Execute.

3.1.1 Main

Shelf (KX-TDE600 only)
Indicates the shelf position (reference only).
Value Range
Shelf type
Slot
Indicates the slot position (reference only).
Value Range
Slot number
Port
Indicates the port number (reference only).
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Channel Attribute
Specifies the channel property of each port to enable several sessions to be performed for one subscription
with the SIP provider.
Value Range
Basic channel: The subscriber channel that is assigned the SIP registration information.
Programming Manual for Virtual SIP Trunk Card
3.1.1 Main
19