Programming A Daily Schedule - Daikin D2270C Owner's Manual & Installation Instructions

Programming a Daily Schedule

Programming a Daily Schedule
To enter Time Period Programming screens,
Press and hold MODE and UP until
the scrolling prompt appears.
Select the number of Occupied time periods – Press the Warmer or
Cooler buttons to choose the maximum number (up to 3 maximum) of
Occupied time periods in a day.
Select the Mode for the Occupied period – Press the Warmer or
Cooler buttons to choose the mode for the occupied period. The
choices are: Off, Heat only, Cool only and AUTO changeover.
Adjust the Occupied Cool Setpoint – Press the Warmer or Cooler
buttons to adjust the Cooling setpoint for comfort.
Adjust the Occupied Heat Setpoint – Press the Warmer or Cooler
buttons to adjust the Heating setpoint for comfort.
Set the Unoccupied Mode – Press the Warmer or Cooler buttons to
choose the mode for the Unoccupied period. The thermostat is in
Unoccupied when the Time Period Schedule is running and there is
not an active Occupied period. The choices are: Off, Heat only, Cool
only and AUTO changeover.
Adjust the Unoccupied Cool Setpoint – Press the Warmer or Cooler
buttons to adjust the Cooling setpoint for times when the thermostat
is in Unoccupied.
29
MODE
Continued