Table Of Contents; Tools Needed - Ancona UC PRO Turbo 30 User Instructions

Table of Contents

Tools needed....................................................3
Parts supplied...................................................4
Venting requirements.......................................5
Mount heights & clearance...........................5-6
Calculating vent system length.......................6
Venting methods..............................................7
Electrical requirements....................................8
Preparation......................................................9
Installation................................................10-11
Range hood operations.............................12-13

Tools needed:

Marker or
pencil
Level
INSTALLATION
Utility knife
Powered
screwdriver
or drill
Troubleshooting...........................................14
Use and care information...............................15
Specifications..............................................15
Measurements & Diagrams......................16-22
Cleaning.................................................23
Replacing the filter & light bulb.....................23
Coverage & exceptions..................................24
Flat-blade
and Phillips
screwdrivers
USE AND CARE
MAINTENANCE
WARRANTY
Measuring
tape
Page 3