PROAIM KITE-22-ULTIMATE Assembly Manual page 8


Repeat this process for rest of the sections.
Attach them towards the other Section 6 with
5 , 5 with 4, 4 with 3, 3 with 2 & 2 with 1.
Head Section Setup

Remove the bolt from head section then
attach with the jib.

Attach the provided bolt, shaft collars,
washers and nut. Tighten all the Allen bolts
and nuts to secure properly as shown in the
image.

Connect the one end of Head Platform
Levelling cable with the head platform by
hooking the turnbuckle ends.

Attach other end with the hub assembly.
Rear Frame Setup

To mount Rear section of jib, insert the bolt
with washers through one end of the section
to other. Slide the bolt through and secure
by tightening with hand.
3
2
1
8