NOTE: To keep the dolly in static position, lock
the wheels by pushing down the lever.
Remove the allen bolts from tripod holders.
Match the hole of Tripod holder with dolly to
insert the long bolt & tighten it with the help
of allen key.
Place the jib stand onto dolly.
Firstly, place Ultimate Gravity Stand Bowl top
of the Stand. Then tighten the provided knob.
Hub Section Setup
NOTE: The Hub Assembly has several mounting holes. You can mount LCD Monitor or Joystick box to
this assembly if you want.
Install the Hub Assembly by sliding from the
bottom side into the stand's Mount opening.
6