PROAIM KITE-22-ULTIMATE Assembly Manual page 5

Jib Stand Setup

Now take out the Tripod Stand from its case,
and stretch its legs on floor as per the
requirement.

Loosen knob at the bottom of jib stand.
Stretch its legs on floor and set height of
stand, as per the requirement. Then tighten
the knob back to secure it.
NOTE: We have provided double locking
precautions on Jib Stand. knob is the first and
primary, locking pin is the secondary locking, so
first lock the knob to avoid slipping of stand.
Dolly Setup
NOTE: This dolly has various holes for flexible mounting of Tripod.

To open the legs of Dolly remove the bolts &
fully spread it on floor.

Then insert the bolts with their washer and
tighten the bolts properly.
5
Pin
Knob