Section 4 - Specifications; Serial Number And Rating Label Location; Software Licensing Agreement; Information About Default Weld Parameters And Settings - Miller Trailblazer 325 Owner's Manual

4-1.

Serial Number And Rating Label Location

The serial number for this product is located on the front. The rating information for this product is located on the back. Use rating label to deter-
mine rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2.

Software Licensing Agreement

The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www.millerwelds.com/eula
4-3.

Information About Default Weld Parameters And Settings

NOTICE – Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical
welding parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are
for reference purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriate-
ness of all parameters and settings should be evaluated and modified by the end user as necessary based upon application-specific require-
ments. The end user is solely responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld
parameters and settings, and ultimate quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warran-
ties including any implied warranty of fitness for a particular purpose.
4-4.

Weld, Power, And Engine Specifications

�
This equipment will deliver rated output at an ambient air temperature up to 104°F (40°C).
Welding Mode
CC/DC
CV/DC
Generator Power Rating
Peak: 12 kVA/kW
Continuous: 10.5 kVA/kW, 88/44 A, 120/240
V AC, 60 Hz, Single-Phase
4-5.

Environmental Specifications

A. Temperature Specifications
Operating Temperature Range*
14 to 104°F (-10 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
�
Complete Parts List is available at www.MillerWelds.com
SECTION 4 – SPECIFICATIONS
and are incorporated by reference herein.
Rated Welding Output
325 A, 28 V, 100% Duty Cycle
325 A, 28 V, 100% Duty Cycle
Fuel Capacity
12 gal (45 L) Tank
Weld Output Range Maximum Open-Circuit Voltage
20–325 A
15–40 V
20–325 A
Kohler CH730 Air-Cooled, Two-Cylinder,
Four-Cycle, 23.5 HP Gasoline Engine
Kohler ECH-730 Air-Cooled, Two-Cylinder,
Four-Cycle, 23 HP Electronic Fuel Injected
Storage/Transportation Temperature Range
-4 to 131°F (-20 to 55°C)
100 VDC
Engine
OR
Gasoline Engine
OM-279639 Page 17