Fujitsu SE500 Basic Operating Manual page 35

Controls
Monitor operating panel
The operating panel is at the bottom right of the monitor.
(1)
(2)
(3)
(4)
(5)
(6)
i
U41858-J-Z126-2-76
6 5
Power button
Press this button to turn on the power to the monitor, or, if the power is already on,
to turn off the power to the monitor.
Power LED
This LED lights up green when the power to the monitor is on, and lights orange
when the monitor is in energy-saving mode. The light goes off when the monitor is
turned off.
MENU/ENTER button
Press this button to open the menu, to select an item to be adjusted, and to save
an adjusted setting.
UP button
Press this button to select the right-hand item or to increase the value.
DOWN button
Press this button to select the left-hand item or to increase the value.
AUTO/EXIT button
Press this button to close the menu, to cancel the selection of an item to be
adjusted, to cancel an adjusted setting, or to perform automatic adjustment.
It is possible to directly adjust the screen brightness by pressing the UP or DOWN
button when the menu is not displayed.
It is possible to perform automatic adjustment (position and focus) by pressing the
AUTO/EXIT button.
4 3 2
Rack console
1
35