Symbols for warnings, prohibitions, mandatory actions and standards are taken from publicly accessible sources, such as the Internet. CAD product images and product photos are provided by the manufacturer. Images showing the product in use are provided with a reference to the source. 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
Warning levels Important safety instructions Intended use Requirements for the target group Duties of the operator PRODUCT DESCRIPTION Scope of delivery Design Symbols and connections Technical data OPERATION Startup Cleaning Storage Disposal Maintenance HELP Warranty Customer service 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
With extensive experience in software and hardware development, CAR-connect is your dependable partner at every production stage, from prototyping to series production. CAR-connect GmbH – Experience, Expertise and Innovation – MADE IN GERMANY 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
This operating manual is only valid for the following product: Item number 22102948 Designation OBD extension cable VAS 6154/9 Warning levels This chapter provides information about the warning levels used in this operating manual. DANGER Failure to observe the safety instructions WILL result in death or serious injury!
Defective and damaged products cannot guarantee protection against electrical voltage! • Do not let the product come into contact with chemicals! • Replace a defective or damaged product immediately! • Never attempt to repair or tamper with the product! 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
Use only the plug connections on the vehicle that the manufacturer has specified in the guided fault finding. In this operating manual, vehicle manufacturers are exclusively defined as vehicle manufacturers in the Volkswagen Group. Any use beyond what is listed here is prohibited. Requirements for the target group...
Immediately check the condition of the product and the completeness of the delivery. If anything is missing or defective, please contact the manufacturer immediately. (1) OBD extension cable (2) USB stick with operating manual Design Product design: (1) OBD socket (2) OBD plug 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
The CE marking certifies that the product complies with all applicable European regulations and has been subjected to the prescribed conformity assessment procedure. The test seal identifies the product as having been approved for use in workshops and production facilities belonging to the vehicle manufacturer. 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
Max. 2000 m No limitation. Humidity Max. 80 % up to 31° C, Max. 85 % decreasing linearly to 50 % at 40° C Condensation not permitted. Maximum permissible relative humidity: 60 % in environments with corrosive gas/air. 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
• Use the product only for the applications intended by the vehicle manufacturer! Startup Observe the safety instructions. 2. Connect the OBD socket to the diagnostic interface. 3. Connect the OBD plug to the OBD socket on the vehicle. You can now run diagnostics via the diagnostics interface. 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
Observe the safety instructions! National and local requirements for regular testing must be observed! Test the product for proper function at intervals of no more than 24 months. Contact the manufacturer to have a professional function test performed. 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
Always include the serial number with any product queries. This number is found on the product. CAR-connect GmbH Am Egelingsberg 8 38542 Leiferde, Germany Phone: +49 (0) 5373 – 92197-0 Fax: +49 (0) 5373 – 92197-88 service@car-connect.cc www.car-connect.cc 35.VW.2210.2948_BA_V00_EN VAS 6154/9...
Page 14
Volkswagen Aktiengesellschaft K-GVO-LW Group After Sales – Group Service Literature and Systems Repair Shop Equipment PO box 011/4915 38442 Wolfsburg, Germany For internal use only Subject to technical changes Edition 03 / 2021 35.VW.2210.2948_BA_V00_EN VAS 6154/9...