Table of Contents
Advertisement
1.888.610.7664
20 Maintenance, cleaning, storage
Danger of injury during maintenance, repair and transport
Danger from mains voltage.
•
•
•
•
20.1 Maintain the refrigeration capacity.
The device is designed for continuous operation in normal conditions. No
regular maintenance work is required.
The condenser on the front should be cleaned from time to time to
maintain the full refrigeration capacity.
1.
2.
3.
4.
5.
20.2 Cleaning
Use low surface tension water (for example soap suds) to clean the bath
and the functional parts of the circulator which are immersed in it. Clean
the exterior device with a cloth and low surface tension water.
The circulator is designed for continuous use in normal conditions. No
regular maintenance work is required.
The bath tank should only be filled with suitable bath fluid. In the event
of contamination, the bath fluid must be replaced from time to time.
Cleaning open bath tanks
•
•
82
www.calcert.com
15
10
20
5
25
0
30
Have all service and repair work carried out by authorized
specialists only.
Switch off the unit and pull the plug,
- before starting any cleaning work,
- before carrying out any service or repair work or
- before moving the unit.
Empty the unit completely before moving it.
Transport the unit carefully.
Switch off the device.
Pull the plug.
Let the unit cool down to room temperature.
Remove the ventilation grille.
Vacuum the dirt on the condenser.
Leaking bath tanks due to unsuitable cleaning products.
These bath tanks are not resistant to solvents and pure alcohol.
Incorrect cleaning products will make the surface of the bath go
sales@calcert.com
Advertisement
Table of Contents
