Others Screen - ZyXEL Communications NR Series User Manual

The following table describes the labels in this screen.
Table 40 Network Setting > Wireless > WMM
LABEL
WMM of SSID
WMM
Automatic
Power Save
Delivery (APSD)
Cancel
Apply

8.7 Others Screen

Use this screen to configure advanced WiFi settings, such as additional security settings, power saving,
and data transmission settings. Click Network Setting > Wireless > Others. The screen appears as shown.
See Section 8.11.2 on page 139
Figure 76 Network Setting > Wireless > Others
Chapter 8 Wireless
DESCRIPTION
Select On to have the Zyxel Device automatically give the
according to the ToS value in the IP header of packets it sends. WMM QoS (
Quality of Service) gives high priority to video, which makes them run more smoothly.
SSID1 is the General WiFi SSID; SSID2-SSID4 are the Guest WiFi SSIDs.
If the 802.11 Mode in Network Setting > Wireless > Others is set to include 802.11n or 802.11ac,
WMM cannot be disabled.
Select this option to extend the battery life of your mobile devices (especially useful for small
devices that are running multimedia applications). The Zyxel Device goes to sleep mode to save
power when it is not transmitting data. The AP buffers the packets sent to the Zyxel Device until
the Zyxel Device "wakes up." The Zyxel Device wakes up periodically to check for incoming
data.
Note: This works only if the WiFi device to which the Zyxel Device is connected also
supports this feature.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
for detailed definitions of the terms listed here.
NR/FWA Indoor Series User's Guide
131
WiFi
network (SSIDx) a priority level
WiFi
MultiMedia