Save Config; Power-Up Config - Printronix SL5000E Quick Setup Manual

Save Config.

Allows you to save up to eight unique configurations to meet
different print job requirements. This eliminates the need to change
the parameter settings for each new job. The configurations are
stored in memory and will not be lost if you turn off the printer.
The default is 1.

Power-Up Config.

You can specify the Factory configuration or any one of the eight
possible saved configurations as the power-up configuration.
The default is Factory.
SMT: Status
This menu appears only if an RFID encoder is installed. See
"Software Migration Tools (SMT)" in the RFID Labeling Reference
Manual .
•
Disabled.The printer disables the use of the Software
Migration Tools.
•
Enabled. The printer enables the use of the Software Migration
Tools.
SMT: Sel Toolset
This menu appears only if an RFID encoder is installed. See
"Software Migration Tools (SMT)" in the RFID Labeling Reference
Manual .
•
Toolset [1]. SMTs for PGL emulation.
•
Toolset [2]. SMTs for PPI1 emulation.
•
Toolset [3] and Toolset [4]. Reserved for internal use and
future design.
QUICK SETUP Menu Items
47