Media Handling - Printronix SL5000E Quick Setup Manual

QUICK SETUP Menu

Media Handling

This menu item specifies how the printer will handle the media
(labels or tag stock).
•
Tear-Off Strip. Printer prints on the media and sends it out the
front until the print buffer is empty, then positions the last label
over the tear bar for removal.
•
Tear-Off. After each label is printed, the printer positions the
label over the tear bar and waits for you to tear off the label
before printing the next one (on-demand printing). A "Remove
Label" message displays to remind you to remove the label
before the next one can be printed.
•
Peel-Off. When the optional rewinder is installed, prints and
peels die cut labels from the liner without assistance. The
printer waits for you to remove the label before printing the next
one (on-demand printing). The label liner is rewound on the
internal rewinder. A "Remove Label" message displays to
remind you to remove the label before the next one can be
printed.
•
Cut. When the optional media cutter is installed, it
automatically cuts media after each label is printed or can cut
after a specified number of labels have been printed using a
software cut command. It cuts continuous roll paper, labels, or
tag stock.
NOTE: This option is hidden when RFID Reader is set to Enable in
•
Continuous. Printer prints on the media and sends it out the
front.
The default is Tear-Off Strip.
40
the RFID CONTROL menu.