HP 53181A Programming Manual page 8

Contents
How to Program the Counter for Math/Limit Operations 3-51
Updating Math and Limit Results Over HP-IB 3-51
Using the Scale and Offset Over HP-IB 3-52
How to Program the Counter to Define Macros 3-54
Writing SCPI Programs 3-57
Programming Examples 3-60
Using HP BASIC 3-60
To Send a Double-Quoted String 3-60
To Send a Single-Quoted String 3-60
Using QuickBASIC 3-61
Using Turbo C 3-61
List of the Programming Examples 3-61
Easiest Way to Make a Measurement (HP BASIC) 3-62
To Make a Frequency Measurement (HP BASIC) 3-64
To Perform Limit Testing (HP BASIC) 3-65
To Measure the Statistics of 50 Measurements(HP BASIC) 3-66
To Use Limits to Filter Data Before Measuring Stats (HP BASIC) 3-68
To Read and Store Calibration Information (HP BASIC) 3-70
To Optimize Throughput (HP BASIC) 3-71
To Use Macros (HP BASIC) 3-73
To Make a Frequency Measurement (QuickBASIC) 3-75
To Perform Limit Testing (QuickBASIC) 3-76
To Measure the Statistics of 50 Measurements (QuickBASIC) 3-78
To Use Limits to Filter Data Before Measuring Stats
(QuickBASIC) 3-80
To Read and Store Calibration Data (QuickBASIC) 3-82
To Optimize Throughput (QuickBASIC) 3-83
To Use Macros (QuickBASIC) 3-85
To Make a Frequency Measurement (Turbo C) 3-88
To Use Limits to Filter Data Before Measuring Statistics
(Turbo C) 3-90
To Optimize Throughput (Turbo C) 3-93
vi