HP 53181A Programming Manual page 168

Commands Reference
:CALCulate[1] Subsystem
:CALCulate[1]:MATH[:EXPRession][:DEFine]?
Queries equation used for math operation.
Query Response A sequence of ASCII-encoded bytes:
("SENS" * SCALE + OFFSET)
terminated with a new line and EOI.
• Query only.
Comments
• This query should be the la st query in a terminated program message;
otherwise, error -440 is generated.
:CALCulate[1]:MATH[:EXPRession]:NAME SCALE_OFFSET
:CALCulate[1]:MATH[:EXPRession]:SELect SCALE_OFFSET
Sets or queries the name of the expression selected for math processing .
Query Response A sequence of ASCII-encoded bytes: SCALE_OFFSET
Comments
*RST: SCALE_OFFSET
:CALCulate[1]:MATH:STATe <Boolean>
Sets or queries the math enable .
This enable specifies whether or not measurement (SENSe) data will be scaled and
offset.
• Single ASCII-encoded byte, 0 or 1.
Query Response
• A value of 0 indicates OFF; a value of 1 i ndicates ON.
• *RST: OFF
Comments
• Updating the math enable causes the limit counts (:CALC2:LIM:FCO,
:CALC2:LIM:PCO) to be cleared.
Related
Scale & Offset
Front-Panel
Keys
4-10
or