HP 53181A Programming Manual page 33

Commands Summary
Front Panel to SCPI Command Maps
2
a. [:SENSe]:FUNCtion[:ON] "[:][XNONe:]PERiod [1]"
b. [:SENSe]:FUNCtion[:ON] "[:][XNONe:]FREQuency:RATio [1,2]"
c. [:SENSe]:FUNCtion[:ON] "[:][XNONe:]FREQuency:RATio 2,1"
d. [:SENSe]:FUNCtion[:ON] "[:][XNONe:]VOLTage:MINimum [1]"
[:SENSe]:FUNCtion[:ON] "[:][XNONe:]VOLTage:MAXimum [1]"
3
[:SENSe]:FUNCtion[:ON] "[:][XNONe:]FREQuency 2"
Since the primary purpose of these front-panel keys is to change the function, the
corresponding [:SENSe]:FUNCtion[:ON] command is listed in the menu map
above. The front-panel keys, however, invoke couplings which affect other settings,
whereas the [:SENSe]:FUNCtion[:ON] command does not.
Figure 2-3. MEASURE Keys to SCPI Command Map (Part 1 of 2)
OR
2-9