Setting A Disc To Protect; Finalising Discs - Toshiba RD-97DTKB Owner's Manual

E2J70BD_EN.book Page 53 Friday, June 29, 2007 2:50 PM

Setting a Disc to Protect

VR
DVD-RW DVD-RW DVD+RW DVD+RW
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using the
Setup menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [U \ D],
then press [ENTER/OK].
3
Select "Disc Protect OFF A ON"
using [U \ D], then press
[ENTER/OK].
4
Select "Yes" using [U \ D], then
press [ENTER/OK].
The disc is protected.
5
Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a
disc recorded in VR or +VR mode is inserted.
• You can select only "Disc Protect ON A OFF" when
a protected disc is inserted.
To cancel the disc protect:
• Select "Disc Protect ON A OFF" at step
select "Yes".
• If you insert a disc protected with this unit,
"Disc Protect ON A OFF" will appear instead of
"OFF A ON".

Finalising Discs

DVD+R D D VD+R VD+R
You will need to finalise discs to play them back in
other units.
Finalising may take from several minutes up to an
hour.
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
Insert a recordable disc before
finalising.
3
, then
To cancel finalising (DVD-RW disc only):
Video VR
DVD-RW D D VD-R VD-RW W DVD-RW DVD-RW DVD-R DVD-R
DVD+R D D VD+R VD+R
1
In stop mode, press [SETUP].
2
Select "DVD Menu" using [U \ D],
then press [ENTER/OK].
3
Select "Finalise" using [U \ D], then
press [ENTER/OK].
4
Select "Yes" using [U \ D], then
press [ENTER/OK].
e.g.) VR mode DVD-RW disc
Finalise disc?
Yes
No
Finalising will start.
4
At step , press [STOP C]. Select "Yes" using
[U \ D], then press [ENTER/OK]. Finalising is
cancelled and the unit switches to stop mode.
Do you want to cancel ?
Yes
No
Finalising
If appears when [STOP C] is pressed, you
cannot cancel finalising because the finalising has
already reached at a critical point in its process.
If "No" is selected and [ENTER/OK] or
[RETURN/BACK] is pressed, finalising is
continued.
You cannot cancel finalising a DVD-R and
DVD+RW/+R disc once it has started.
DVD+RW D D VD+R VD+RW W
10%
53
EN