Toshiba RD-97DTKB Owner's Manual page 23

Hdd & dvd video recorder
Hide thumbs Also See for RD-97DTKB:
Table of Contents

Advertisement

E2J70BD_EN.book Page 23 Friday, June 29, 2007 2:50 PM
Digital Audio for Better Sound Quality
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
DIGITAL COAXIAL
IN
Y
DIGITAL COAXIAL
P
B
/C
B
ANALOG
L
P
R
/C
R
OUT
ANALOG
R
DVB-T
ANALOG
AV2 (DECODER)
AUDIO
COMPONENT
ANTENNA
OUT
VIDEO OUTPUT
The connections illustrated above are
optional for better sound.
1
For clear digital sound quality, use
the AUDIO OUT (DIGITAL COAXIAL)
jack to connect your digital audio
equipment.
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
Connecting a Dolby Digital™ decoder, DTS
decoder or MPEG decoder
• Connecting multi-channel Dolby Digital decoder
allows you to enjoy the Multi-channel Dolby Digital
surround system as well as DTS decoder, Multi-
channel surround system.
• After connecting to a Dolby Digital decoder, set
"Dolby Digital" to "Stream" in the Audio Out menu.
(See page 82.)
• After connecting to a DTS decoder, set "DTS" to
"ON" in the Audio Out menu. (See page 82.)
• After connecting to a MPEG decoder, set "MPEG" to
"Stream" in the Audio Out menu. (See page 82.)
Connecting to an MD deck or DAT deck
• The audio source recorded in Dolby Digital Multi-
channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
• If not connected to a Dolby Digital decoder, set
"Dolby Digital" to "PCM" in the Audio Out menu.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
• Set "Dolby Digital" and "MPEG" to "PCM" and set
"DTS" to "OFF" in the Audio Out menu for
connecting to an MD or DAT deck.
• You can use AUDIO OUT (ANALOG L/R) jacks for
the connection of your audio system.
After You Have Completed
Connections
Digital audio
input jacks
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the
Owner's Manual of your TV.
COAXIAL
• Connect this unit directly to the TV. If the AV cables
Coaxial cable
(not supplied)
HDMI OUT
AV1 (TV)
Note
are connected to a VCR, pictures may be distorted
due to the effects of the copy protection system.
23
EN

Advertisement

Table of Contents
loading

Table of Contents