Table of Contents
Advertisement
E2J70BD_EN.book Page 86 Friday, June 29, 2007 2:50 PM
HDMI
1
In stop mode, press [SETUP]. Select
"General Setting" using [U \ D],
then press [ENTER/OK].
2
Select "HDMI" using [U \ D], then
press [ENTER/OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
3
Select the desired item using
[U \ D], then press [ENTER/OK].
1
Format
2
HDMI Audio
3
RGB Range
4
Refer to
1.
to
3.
the selected item.
5
When you finish with the setting,
press [SETUP] to exit.
1. Format (Default: RGB)
You can select the colour space for HDMI output.
Set the appropriate colour space for your display
device.
Select a setting using [U \ D], then
press [ENTER/OK].
• When the connected device is not compatible with
the Y/Cb/Cr, HDMI signal is output as RGB
regardless of the setting.
Format
RGB
YCbCr
Your setting is activated.
2. HDMI Audio (Default: ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
AUDIO OUT (DIGITAL COAXIAL) jack to your audio
system, etc.), you can set the HDMI audio output off.
Select a setting using [U \ D], then
press [ENTER/OK].
• Set to "OFF" when the HDMI sound is not outputted.
HDMI Audio
ON
OFF
Your setting is activated.
86
EN
on this page and set
3. RGB Range (Default: Normal)
You can adjust the RGB range to make the dark areas
of the HDMI images brighter.
Select a setting using [U \ D], then
press [ENTER/OK].
• Select "Enhanced" if the black-white contrast is not
clear.
• This setting is effective only for HDMI RGB output.
RGB Range
Normal
Enhanced
Your setting is activated.
Advertisement
Table of Contents
