Printronix L1524 Setup Manual page 27

1. Open the starter toner bottle, from the developer kit, and attach the
spout. (See Figure 2–4.)
2. Carefully open the developer unit cover.
3. Carefully pour the starter toner into the developer unit. Make sure to
spread the toner evenly from side to side.
4. Close the developer unit cover. Press the cover until you hear a click
which indicates that the developer unit is closed completely.
5. Clean up any toner that may have spilled during this process using one
of the moist towels that come with the cleaning kit inside the developer
kit.
NOTE: Some software stops communicating with the printer if the printer is
Starter Toner Bottle
(with spout attached)
Setting Up the Printer
off line for more than two minutes. In this case, you may need to
restart your print job.
Developer Unit Cover
(shown in the open position)
Figure 2–4. Filling the Toner Cartridge
2–9