Printronix L1524 Setup Manual page 103

INSUFFICIENT RAM
REBOOT/ADD RAM
LOADING FONTS
LOADING PROGRAM
FROM PORT xx %
LOADING PROGRAM
INTO FLASH
OPTIMIZING FLASH
FILES
RESETTING... PLEASE
WAIT
SECURITY CODE
VIOLATION
STANDBY...
TESTING HARDWARE
PLEASE WAIT
WAITING FOR
PROGRAM
DOWNLOAD
Configuring the Printer
Before the printer can write a file
into the flash file system, the file
must be completely stored in the
DC DRAM. In certain situations,
there might be insufficient
DRAM space for the file,
especially when the printer has
been operating for some time.
The printer is copying fonts from
DC flash memory to DC DRAM.
The printer is downloading the
new program into printer RAM.
xx indicates how much of the
program has been downloaded.
The printer has deleted the old
program from the flash file
system, and is now writing the
new program into the flash file
system.
The printer is reclaiming unused
space from deleted files in the
flash file system.
The printer has finished writing
the new program into the flash
file system and is automatically
resetting itself.
The software running or being
downloaded does not match the
security PAL code.
The printer is performing inter-
nal initializations.
The printer is running its
hardware self-test.
The printer is ready to receive
the download data.
Reboot the printer to
clear the DC DRAM. If
the message persists,
contact service provider.
None.
None.
None.
None (wait for the printer
to reboot).
None.
Contact service provider.
None.
None.
Start sending the file to
the printer.
3–63