Table of Contents
Advertisement
System Configuration
Time
Enable SMART Reporting
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable Boot Support
Enable External USB Ports
SATA Operation
Drives
M.2 PCIe SSD-0/SATA-2
SATA-0
Drive Information
Miscellaneous Devices
Enable Camera
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on Battery
Touchscreen
Table 6. System setup options—Video menu
Video
LCD Brightness
56
System setup
Sets the computer time in HH/MM/SS 24-hour format. You can switch between 12-
hour and 24-hour clock. Changes to the time take effect immediately.
Enables or disables SMART (Self-Monitoring, Analysis, and Reporting Technology)
during computer startup to report hard drive errors.
Default: OFF.
Enables or disables all integrated audio controller.
Default: ON.
Enables or disables microphone.
Default: ON.
Enables or disables internal speaker.
Default: ON.
Enables or disables booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
Enables or disables USB ports to be functional in an operating system environment.
Configures operating mode of the integrated SATA hard drive controller.
Default: RAID. SATA is configured to support RAID (Intel Rapid Restore Technology).
Enables or disables various onboard drives.
Default: ON.
Default: ON.
Displays the information of various onboard drives.
Enables or disables various onboard devices.
Enables or disables the camera.
Default: ON.
Configures the operating mode of the keyboard illumination feature.
Default: Disabled. The keyboard illumination will always be off.
Configures the timeout value for the keyboard when an AC adapter is connected to
the computer. The keyboard backlight timeout value is only effect when the backlight
is enabled.
Default: 10 seconds.
Configures the timeout value for the keyboard when the computer is running on
battery. The keyboard backlight timeout value is only effect when the backlight is
enabled.
Default: 10 seconds.
Enables or disables the touchscreen for the operating system.
NOTE:
Touchscreen will always work in the BIOS setup irrespective of
this setting.
Default: ON.
Advertisement
Table of Contents
