Table of Contents
Advertisement
8. Turn the computer over and open the display as far as possible.
CAUTION:
Place the computer on a soft and clean surface to avoid scratching the display.
9. Turn the computer over and remove the five screws (M2.5x3.5) that secure the display hinges to the I/O board and system board.
10. Lift the display assembly off the palm-rest assembly.
Replacing the display assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
36
Removing and installing components
computer. After working inside your computer, follow the instructions in
After
Advertisement
Table of Contents
