Table of Contents
Advertisement
Replacing the touchpad
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Slide the touchpad into the slot on the palm-rest assembly.
2. Replace the two screws (M1.6x2) that secure the touchpad to the palm-rest assembly.
3. Adhere the tapes that secure the touchpad to the palm-rest assembly.
4. Adhere the touchpad cable to palm-rest assembly and slide the touchpad cable into the connector on the touch pad and close the
latch to secure the cable.
5. Align the screw holes on the touchpad bracket with the screw holes on the palm-rest assembly.
6. Replace the three screws (M2x3) that secure the touchpad bracket to the palm-rest assembly.
7. Adhere the tapes that secure the touch-pad assembly to the palm-rest assembly.
30
Removing and installing components
computer. After working inside your computer, follow the instructions in
After
Advertisement
Table of Contents
