Table of Contents
Advertisement
Replacing the speakers
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Using the alignment posts on the palm-rest assembly, place the speakers on the palm-rest assembly.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Adhere the tapes that secure the speaker cable to the touchpad bracket.
4. Connect the speaker cable to the system board.
5. Adhere the tape that secures the speaker cable to the connector.
32
Removing and installing components
computer. After working inside your computer, follow the instructions in
After
Advertisement
Table of Contents
