Table of Contents
Advertisement
Replacing the fan
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Using the alignment posts, place the fan on the palm-rest assembly.
2. Replace the two screws (M2x3) that secure the fan to the palm-rest assembly.
3. Adhere the tape that secures the fan cable to the fan.
4. Connect the fan cable to the system board.
computer. After working inside your computer, follow the instructions in
Removing and installing components
After
23
Advertisement
Table of Contents
