Table of Contents
Advertisement
2. Remove the screw (M2x2) that secures the solid-state drive/Intel Optane storage module to the palm-rest assembly.
3. Slide and remove the solid-state drive/Intel Optane storage module from the solid-state drive slot.
Replacing the solid-state drive
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
Procedure to replace M.2 2230 solid-state drive
1. Align the notch on the solid-state drive with the tab on the solid-state drive slot and slide the solid-state drive firmly into the solid-
state drive slot at an angle.
2. Peel the tape from the solid-state drive bracket.
3. Adhere the solid-state drive bracket on the system board and secure the solid-state drive.
4. Replace the two screws (M2x3) that secure the solid-state drive to the palm-rest assembly.
26
Removing and installing components
computer. After working inside your computer, follow the instructions in
After
Advertisement
Table of Contents
