Table of Contents
Advertisement
Replacing the power-adapter port
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Place the power-adapter port into the slot on the palm-rest assembly.
2. Replace the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3. Connect the power-adapter port cable to the system board.
4. Close the left display hinge.
5. Replace the three screws (M2x3.5) that secure the left display hinge to the system board.
computer. After working inside your computer, follow the instructions in
Removing and installing components
After
19
Advertisement
Table of Contents
