Table of Contents
Advertisement
7. Remove the
solid-state
8. Remove the
coin-cell
battery.
9. Remove the
touch
pad.
10. Remove the speakers.
11. Remove the
display
assembly.
12. Remove the
system
board.
13. Remove the keyboard.
14. Remove the
power button with fingerprint
Procedure
After performing the steps in prerequisites, we are left with the palm rest.
Replacing the palm-rest and antenna assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Place the palm rest on a flat surface.
Post-requisites
1. Replace the
power button with fingerprint
2. Replace the keyboard.
3. Replace the
system
board.
4. Replace the
display
assembly.
5. Replace the speakers.
6. Replace the
touch
pad.
7. Replace the
coin-cell
battery.
50
Removing and installing components
drive.
reader.
computer. After working inside your computer, follow the instructions in
reader.
After
Advertisement
Table of Contents
