Panasonic WX-CC412BP Operating Instructions Manual page 24

Setting the Center Module
Note
w p Do not re-register the same Wireless Repeater to one
Center Module.
L ID registration will fail if you try to register an already
w
registered Wireless Repeater to the same lane.
L When using WX-CC412BP, you can register an
w
already registered Wireless Repeater to a different
lane; however, it can then only be used in the
lane where it is newly registered. The previous
ID registration of the Wireless Repeater must be
deleted.
Cancel registration of Wireless Repeaters.
1
Disconnect the USB power adaptor of the
Wireless Repeater for which you want to delete
the ID.
2
On the Settings screen, touch the [Wireless
Repeater] button, ([Lane A/B] button,)* and
then the [ID Deletion] button.
* This appears only when the WX-CC412BP is used.
w p All of the Wireless Repeater with registered IDs are
displayed in a list.
3
On the ID Deletion screen, touch the [Deletion]
button of the Wireless Repeater to be deleted.
w p The following confirmation pop-up screen is
displayed. To continue ID deletion, touch the [YES]
button. To stop ID deletion, touch the [NO] button.
w p Touch the [YES] button, and the registration of the
Wireless Repeater is deleted.
Note
w p If the Wireless Repeater has not yet been registered,
you will not be able to touch the [ID Deletion] button.
24
How to delete an ID