Trainer - Life Fitness INTEGRITY+ Series Assembly Instructions Manual

Where to Place and How to Stabilize the Cross-Trainer
Read the entire manual before setting up the cross-trainer. After following all Safety Instructions, move the unit to the
location where it will be used. Allow 1 ft. (0.3 m) of clearance in front of the cross-trainer and at least 2 ft. (0.6 m) on the
side. It should be easy to mount the cross-trainer from the side.
Free area
After placing the unit in position, check the unit's stability by attempting to rock it from side to side. Any slight rocking
indicates that the unit must be leveled. Determine which foot is not resting completely on the floor. Loosen the jam
nut with an open-end M17 wrench and rotate the stabilizing foot to lower it. Verify that the unit is stable. Repeat the
adjustment as necessary until the unit no longer rocks. Lock the adjustment by tightening the jam nut against the
stabilizing bar.
1 ft. (0.3 m)
2 ft. (0.6 m)
Page 8 of 25
2 ft. (0.6 m)
Description
1
2 Stabilizing Leg
Jam Nut