Launch Creader 7001S Instructions Manual page 30

LAUNCH
There are 2 methods available to update your tool. You may choose one of the
following to proceed.
Method 1: Via Memory Card (recommended)
1. Launch the update tool, a screen similar to figure 7-2 will appear:
2. In figure 7-2, type in the Product Serial Number (located at the back of the
tool).
Note: Once the S/N is entered, "Restore System" becomes activated, which is used to
restore system if a new memory card is replaced.
3. Click [Device Upgrade] to enter the sign-up page. Enter the information and
click [Submit] (refer to figure 7-3).
Creader 7001S/8001S English User's Manual
Figure 7-2
Figure 7-3
24