Yealink SIP-T19P E2 Recovery Manual page 7

Hide thumbs Also See for SIP-T19P E2:

Recovery Mode on Yealink IP phones

Press 1 to run the backup system.

Note

For CP965/CP925 IP phones,

key when the Mute LED indicator glows red to trigger the recovery mode.

Using Recovery Mode on Yealink IP Phones

(HTTP Server)

This section introduces how to perform recovery mode using the HTTP server on Yealink IP phones step

by step.

For SIP Phone Series

This section is only applicable to SIP phone series including SIP-T27G, SIP-T30, SIP-T30P, SIP-T31,

SIP-T31P, SIP-T31G, SIP-T33P, SIP-T33G, SIP-T41S, SIP-T42S, SIP-T46S, SIP-T48S, SIP-T58A,

CP960, and CP920.

This feature can only be supported on new factory phones running firmware version 86 or later.

Procedures

Long press

mode. Do not release

Press 1 to use the HTTP server.

you need to p

ower on the device and long tap the Home touch

(Speakerphone key) and reconnect the power adapter to trigger the recovery

until the recovery mode wizard appears on the phone LCD screen.