Restore Factory Settings; Upgrade Firmware - RisingHF RHF2S025 User Manual

RisingHF
RHF2S025 user manual
Figure 5- 1 Power Adapter

6. Restore factory settings

Keep pressing the RESET key for more than 5 seconds, with system led being from the slow blinking to
quick blinking, RHF2S025 will restore factory settings.
Note: After the factory settings are restored, the user will lose all configuration data.

7. Upgrade firmware

Follow the steps below to upgrade the firmware:
1) Download the FW into the U disk from RisingHF website. User can't change the firmware name, or
the device will fail to upgrade.
2) Insert the U disk into the device and then power on again.
3) USB LED will blink fast, it means the firmware in the U disk is being read.
4) System led start blinking, the system is being upgraded.
5) The System led stop blinking and the system has been upgraded successfully.
Note: Don't power off when in upgrading, or you need re-do the step from 2) to 5)
V0.3 2019-04-23
23
www.risinghf.com