Lora Sdk; Modify Sdk Configuration - RisingHF RHF2S025 User Manual

RisingHF
Level 2 menu:
Status:
Overview: Display system status, such as: version, memory, network information and other
functions
Network:
Mode: Network configuration, switch modes to access to internet
Ethernet: Ethernet access, be valid in AP mode.
LAN config: LAN configuration, such as: LAN IP address
Region: Region of the gateway location
Diagnostics: check the connection to internet
System
System: System property settings, such as: time, time zone, language
Administration: Modify the password for the current user
Reboot: Reboot the system
Reset: Restore factory settings, the user will lose all data
Lora
Sdk: Built-in SDK, each level 2 menu represents an SDK
Lora rssi:Set the minimum frequency, maximum frequency and stepping to scan the channel
noise and display the results in graphical form
Logout: logout

3.2. LoRa SDK

3.2.1. Modify SDK configuration

RHF2S025 is built-in Packet Forwarder SDK, and provides a web page for configuration, User can
configure their own SDK according to their needs. Currently available configuration options are shown
below:
Protocol Version: The protocol version of the SDK.
Gateway ID: Gateway ID, unique logo on the cloud server. While the GW ID is a little different in
different server, please check the cloud server related rules.
Server Address: Cloud server address.
V0.3 2019-04-23
www.risinghf.com
RHF2S025 user manual
17