Polycom VIU-323 User Manual page 86

Advanced Procedures
Viewing WAN Ports Configuration
"
To view the WAN ports configuration information
Type 3 in the Gateway Ports Configuration menu. The WAN Ports Configuration
menu is displayed.
********************************************************
********************************************************
Type number associated with one of the following topics
1. Back to previous Menu
2. Configuration status of all WAN ports
3. Configuration status per single WAN port
4. Back to main Menu
********************************************************
Viewing the Configuration Status of All WAN Ports
"
To view the configuration status of all the WAN ports
Type 2 in the WAN Ports Configuration menu.
********************************************************
********************************************************
Port NET/USER
********************************************************
0 DCE
1 DCE
2
3
********************************************************
The following information is displayed for the WAN ports:
Port Number – the number of the LAN port.
DTE/DCE – displays whether the WAN line is configured for DCE or DTE mode.
Phys. STD – displays the line type connected to this WAN port.
Status – the status of the LAN port. The status may be either "enabled" or "disabled."
8-8
WAN Ports Configuration
Configuration status of all WAN ports
Phys STD
V35
V35
Status
enabled
enabled
disabled
disabled