Saving Viu-323 Configuration Parameters - Polycom VIU-323 User Manual

Configuration
setting to change by adding a suffix to the dialing stream; see "Making Calls with the
VIU-323."
Note: Set outgoing and incoming default bandwidths to the same value. We recommend
setting the default bandwidth to 384 Kbps (or 336 Kbps restricted) for maximum
quality. If you need to call to an endpoint with a different bandwidth, you can easily
change the bandwidth by using the dialing prefix; see "Making Calls with the
VIU-323."
"
To define dialing settings
1. In the Dialing Settings screen, select * or # or None as the 2nd Number Delimiter.
2. Select the outgoing and incoming default bandwidths; these values must be the same.
3. Click Next. The Save Setup screen is displayed.

Saving VIU-323 Configuration Parameters

To a Configuration File
The Save Setup screen enables you to save the VIU-323 configuration parameters to a local
file. The parameters are saved as an *.ini file to the directory in which the
OnLAN Configure 323 configuration software is installed. The next time you run
OnLAN Configure 323, you can select this file from the Source drop down list in the
Configuration Source screen. Saving configuration parameters to a file may be useful if
you plan to configure more than one VIU-323 unit.
5-12