Selecting The Viu-323 For Configuration; Figure 6 - Select Unit Screen - Polycom VIU-323 User Manual

Configuration

Selecting the VIU-323 for Configuration

Select Unit is the first configuration screen. The Unit IP dropdown list displays all
VIU-323s, L2W-323s and MCUs that are on the same LAN segment as the configuration
PC and whose subnet mask matches that of the configuration PC.
Note For a new device being configured for the first time, you must change the Unit IP of
the VIU–323 as described below

Figure 6 - Select Unit screen

"
To select the VIU-323 for configuration
1. If the VIU-323 you want to configure is not displayed in the Unit IP dropdown list,
click Detect to refresh the list.
2. From the dropdown list, select the VIU-323 you want to configure; if the VIU-323 is
not displayed, manually type its IP address in the text box.
3. Click Next. The Enter Password screen is displayed. (There may be a brief delay.)
4. In the Enter Password screen, type VIUrv in the Password text box (if this is not a
first time configuration and you have changed the default password, type your new
password). The password is case sensitive.
5. Click Next. The Configuration Source screen is displayed.
5-2