Polycom ViaVideoII Release Note page 4

Release Notes
ViaVideo 5.1
Select Save to save the installation file to a location on your computer, then double-click
the saved file to launch the installation wizard.
4. Start the installation wizard, and select your language from the flags shown.
5. On the Required Software page, verify that the required software is already installed on
your computer. Items that are already installed have a checkmark.
6. Click ViaVideo 5.1 to start the installation.
7. After you have installed the software, power on your camera by moving the slider on the
front of the unit all the way to the left.
8. Double-click the ViaVideo desktop icon and complete the setup wizard.
9.
To place a test call, click Call and enter a number.
The Resource Center at
numbers that you can use to test your videoconferencing system.
Installing ViaVideo 5.1 for the First Time
To install and set up your ViaVideo for the first time:
1. Close any programs running on your computer, and install the ViaVideo software from
the installation CD or from the software download page at www.polycom.com.
2. Start the installation wizard, and select your language from the flags shown.
3. On the Required Software page, verify that the required software is already installed on
your computer. Items that are already installed have a checkmark.
4. Click ViaVideo 5.1 to start the installation.
5. Set up the camera as instructed in the ViaVideo QuickStart.
6. Power on your camera by moving the slider on the front of the unit all the way to the left.
7. Double-click the ViaVideo desktop icon and complete the setup wizard.
8. To place a test call, click Call and enter a number.
The Resource Center at
numbers that you can use to test your videoconferencing system.
You need Internet Explorer 5.5 or later to run the install wizard.
www.polycom.com/videotest
www.polycom.com/videotest
- 4 -
provides a list of worldwide
provides a list of worldwide
rel_vv510.doc
updated 10.14.2003