Reverse Door - Heinner HC-H273WA+ Manual

www.heinner.com
X.

REVERSE DOOR

Tool required: Philips screwdriver, Flat
bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
All parts removed must be saved to do the
reinstallation of the door.
Do not lay the unit flat as this may damage
the coolant system.
It's better that 2 people handle the unit
during assembly.
1. Remove four screws in top cover and
then lift it.
2. Unscrew top hinge and then remove
upper door and place it on a soft pad to
avoid scratch.
3. Remove the pin with a screwdriver and
flip the hinge bracket. Then refit the pin
to hinge bracket.
4. Unscrew middle hinge. Then lift lower
door and place it on a soft pad to
avoid scratch.
5. Move the hinge hole covers from left
side to right side.
6. Unscrew bottom hinge. Then remove
the adjustable feet from both side.
7. Unscrew and remove the bottom
hinge pin, turn the bracket over and
replace it.
7