Installation - Heinner HC-H273WA+ Manual

Combi fridge
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
www.heinner.com
VI. INSTALLATION
Important!
For electrical connection carefully follow the instructions given in specific paragraphs.
Unpack the appliance and check if there are damages on it. Do not connect the appliance
if it is damaged. Report possible damages immediately to the place you bought it. In that
case retain packing.
It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation follow the instructions relevant to

installation.

Wherever possible the spacers of the product should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.
The appliance must not be located close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.
VII. SERVICE AND ENERGY SAVING
Any electrical work required to do the servicing of the appliance should be carried out by a
qualified electrician or competent person.
This product must be serviced by an authorized Service Center, and only genuine spare
parts must be used.
Don' t put hot food in the appliance.
Don' t pack food close together as this prevents air circulating.
Make sure food don' t touch the back of the compartment(s).
If electricity goes off, don' t open the door(s).
Don' t open the door(s) frequently.
Don' t keep the door(s) open for too long time.
Don' t set the thermostat on exceeding cold temperatures.
Some accessories, such as drawers, can be removed to get larger storage volume and lower
energy consumption.
5

Advertisement

Table of Contents
loading

Table of Contents